TABLE I - CLASSIFICATION OF DEFECTS (Continued)
146. Flushing, head and body assembly
147. Cleanliness, head assembly
148. Cleanliness, body assembly nine
149. Interchangeability - Mechanical
The tests in Table I shall be conducted at a temperature between +60°
4.3.3 Acceptance and rejection. Rejected lots shall be screened for all
defective characteristics. Removal or correction of defective units and
resubmittance of rejected lots shall be in accordance with "Acceptance and
Rejection" as specified In MIL-STD-105.
4.4 Special sampling.
4.4.1 General. One periscope shall be selected at random from each 100
produced or from each month's production whichever occurs first. The sample
shall meet the requirements and tests in Table II.
Applicable Drawings - visual
MIL-F-13926 - Visual
4.4.2 Environmental. Three periscopes shall be selected at random as
samples from each 50 produced, or from each month's production, whichever
occurs first. Each sample shall meet the requirements and tests in Table III
and shall then meet the requirements and tests in Table I with exception of
Characteristics 101, 102 and 103.
Line of sight orientation
Extreme storage temperatures
of knob locks
(-650 and +150V)