 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-8258D(AS)
Impact.
3.6.5
The pump shall pass the impact test specified
in 4.7.5.
The hose shall not crack when
Hose flexibility.
3.6.6
tested as specified in 4.7.6.
The hose shall not kink or show
Hose kinkfing.
3.6.7
visible deterioration when tested as specified in 4.7.7.
The hose shall not leak when subjected
Hose leakage.
3.6.8
to an air proof pressure of 25 psi as specified in 4.7.8.
Salt spray.
The hose shall pass the salt spray test
3.6.9
specified in 4.7.9.
The weight of the pump without the hose
3.7
Weight.
shall not exceed 1.40 pounds.
All parts having the same
Interchangeability.
3.8
manufacturer's part number shall be functionally and dimensionally
interchangeable.
of product.
Identification
3.9
The pump shall be marked for identification
3.9.1
Pump.
in accordance with MIL-STD-130, and shall contain the following information
in durable and legible markings:
PUMP, HAND, AIR ,
MIL-P-8258 (Revision as applicable)
CONTRACT NUMBER OR CONTRACTOR'S REQUISITION NUMBER
MANUFACTURER'S NAME
SERIAL NUMBER
DATE OF MANUFACTURE
A pressure sensitive decal or label containing the above information is
considered an acceptable substitute.
Workmanship.
Workmanship shall be such as to assure
3.10
compliance with the requirements of this specification and shall be of
Because of the emergency use of the equipment, it is
good quality.
essential that the pump assembly function properly under conditions to
which it may be subjected.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals