 |
|||
|
|
|||
| ||||||||||
|
|  MIL-P-85766(AS)
2.2 Other publications. The following document forms a part of this
specification to the extent specified herein. Unless otherwise specified,
the issues of the documents which are DOD adopted shall be those listed in
the issue of the DODISS specified in the solicitation. Unless otherwise
specified, the issues of documents not listed in the DODISS shall be the
issue of the nongovernment documents which is current on the date of the
solicitation.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
Method of Test for Salt Spray (Fog)
ASTM B117-64
Testing.
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein, the text of this speci-
fication shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption
has been obtained.
3.
REQUIREMENTS.
3.1 Item description. The PGU-30/B Target Practice-Tracer projectile,
shall consist of a steel body, tracer cavity, and a banded body assembly.
3.2 Characreristics.
3.2.1 Performance. When assembled as part of a 20mm cartridge, the pro-
jectile shall meet the performance requirements specified in MIL-C-85764.
3.2.1.1 Metal parts security. The projectile metal parts assembled Into
cartridges shall not separate when tested for metal parts security in
accordance with the applicable requirements of MIL-C-85764.
3.3 Design and construction.
3.3.1 Production drawings. The projectile shall be fabricated in accor-
dance with the applicable requirements specified on Drawing 157SAS401 and
the drawings and specification referenced thereon.
3.3.2 Standards of manufacture.
3.3.2.1 Rotating band. The rotating band blank and the rotating band
seat shall be clean at the time of banding. Shot or sandblasting shall not
be used to clean the serrated band seat after knurling. The rotating band
blank shall fill the band seat.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals