 |
|||
|
|
|||
| ||||||||||
|
|  MIL- Q-45618 F(MU)
The sample for first article approval tests shall consist of 3 quadrants
plus 3 each of all items covered by SQAP. The sample shall be manufac-
tured in the same manner, using the same materials, equipment, processes,
and procedures as used in regular production. All parts and materials,
including packaging and packing, shall be obtained from the same source
of supply as used in regular production.
4.2.1 Government testing.- When the Government is responsible for
conducting first article approval tests, the contractor, prior to sub-
mitting the sample to the Government, shall inspect the sample to insure
that it conforms to all the requirements of the contract and submit a
record of this inspection with the sample, including certificates of
conformance for materials.
4.2.2 Contractor testing.- When the contractor is responsible for
conducting first article approval tests, the sample shall be inspected
by the contractor for all the requirements of the contract. The sample
and a record of this inspection, including certificates of conformance
for materials, shall be submitted to the Government for approval. The
s
Government reserves the right to witness the contractor inspection.
4.3 Inspection provisions.
4.3.1 Submission of Product.- Unless otherwise specified by the con-
tracting officer, inspection lot size, lot formation and presentation of
lots shall be in accordance with "Submission of Product" provisions of
MIL-STD-105.
4.3.2 Examination and
tests.
4.3.2.1 Components and subassemblies.- All components and sub-
`assemblies shall be inspected in accordance with the inspection provi-
sions contained in Supplementary Quality Assurance Provisions (SQAP)
listed in the technical data package (TDP). In the absence of SQAPS,
the applicable Quality Assurance Provisions of MIL-F-13926 shall apply.
Examination, and tests related to Section 3 herein shall be performed on
a single defect (individual characteristic) basis in accordance with
MIL-STD-105 and the sampling plans specified in Tables I, 11 and III
herein. Examination and tests for packaging, packing, and marking shall
be in accordance with MIL-P-14232 and Section 5 herein. The tabulated
classification of defects in Table I, 11 and III shall constitute the
minimum inspection to be performed by the supplier after first article
approval and prior to Government acceptance or rejection by item or lot.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals