 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
3.1.15.7
Cotton and Linen:
3.1.15.7.1
No insulated wire with cotton or linen in its construction shall
be used in the equipment, except when the wire is used for coils
or forms, and the, only provided the insulation on the wire is
completely sealed off against the atmosphere.
3.1.15.7.2
Cotton or linen shall not be used as the base or filler for
laminated or molded-plastic materials, unless the contractor
definitely establishes to the satisfaction of the procuring
activity that absorption of moisture will in no way cause de-
gradation in performance of the equipment as a whole, or in
any way adversely affect the particular put or any parts
associated therewith or adjacent thereto. A cotton-based or
linen-based laminated or molded-plastic material shall not be
used for electrical insulation.
3.1.16
Jacks:
3.1.16.1
Headset Jacks:
Headset jacks shall be JJ-034 in accordance with Specification
MIL-J-641.
3.1.16.2
Microphone Jacks:
Microphone jacks shall be JJ-033 in accordance with Specifica-
tion MIL-J-641.
Locking Devices and Lock Washers:
3.1.17
All screw-head assemblies shall be made vibration proof. Lock
washers shall be plated bronze or corrosion resistant, or
cadmium- or zinc-plated steel. Lock washers shall be provided
under all nuts, except those of the self-locking and castle
types. Lock washers shall be provided under the heads of all
screws not secured by a locked-nut arrangement, except as noted
below. Screw and lock washer and nut or screw assembly, lock
washer and flat washer assembly, and nut and lock washer assem-
blies are considered satisfactory for use, provided they are of
such size and shape that they may be replaced by conventional
screw, nut, and lock-washer combination in case of maintenance.
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals