 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-23016(Wep)
3.3.2.14
Audio Muting:
The audio output of the receiver shall be muted during the
period of channeling or frequency selection.
Automatic Tubing:
3.3.2.15
With the control box energized to select any frequency within
the range of the equipment, all circuits requiring tuning shall
be automatically tuned to resonance.
3.3.2.16
Regeneration:
The interstage and overall regeneration of the receiver shall
be so minimized that no evidence of oscillator, instability
or excessive regeneration shall occur at maximum r-f gain,
minimum squelch, maximum audio output, and maximum primary
input voltages.
Transmitter Performance:
3.3.3
3.3.3.1
Frequency Characteristics:
It shall be possible to transmit on any carrier frequency in
the range of 2 to 29.999 mc. Voice transmission with suppressed
carrier, or continuous carrier, shall be available on all such
frequencies. Carrier frequencies shall be located at increments
of 1000 cps throughout the frequency range commencing with
2.000 mc. Provisions shall be made for direct frequency readout
of 28,000 channels. The equipment shall be calibrated in terms
of carrier frequency.
3.3.3.2
Sideband Selection:
Transmission and reception of either upper of lower sideband
shall be provided.
3.3.3.3
Frequency Stability:
The errors
between indicated and actual carrier frequencies shall
not exceed
0.8 part per million at any selected carrier frequency
within the
prescribed range of the equipment after warm-up in
accordance
with paragraph 3.2.20.2.
107
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals