 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-24414D(SH)
t articl e inspection.
TABLE IV.
Examination
Test
or test
Requirement
method
Visual and dimensional
3.2.4
4.6
Operating
3.3, 3.4
4.7.1
Collapse pressure
3.3.1
4.7.2.2
Enclosure
3.5
4.7.4
Shock
3.11
4.7.5
4.4
pect ion.
Quality conformance inspection shall be
performed on reels selected as specified in 4.5 and shall consist of the tests
and examinations specified in Table V.
Sample size depends on classification of
the characteristic as shown in Table VI.
The major and minor characteristics are
defined in Table VII.
If one or more defects are found in any sample, the entire
lot shall be rejected.
The contractor has the option of screening 100 percent of
the rejected lot for the defective characteristic(s), or providing a new lot which
shall be inspected in accordance with the sampling plan contained herein.
TABLE V.
Quality conformance
inspection.
Examination
Test
or test
Requirement
method
Visual examination
3.2.4
4.6
Operating test
3.3.1
4.7.3
pressurized reel
4.7.2.1
3.3.1
Hydrostatic
test
For purposes of sampling, a lot shall consist of all reels of
4.5.1 lot
the same type, made at the same factory, of the same materials, of the same
construction, and offered for inspection at the same time.
.
4.5.2
for quality conformante. As a minimum, the contractor shall
select sample quantities from each lot of reels in accordance with Table VI and
inspect them in accordance with the quality conformance tests and examinations
designated in Table V,
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals