 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-24414D(SH)
(c) The reels shall be disassembled following the examination after
shock tests specified and examined thoroughly for damage. The
effects of the shock tests and subsequent check tests on the
structure shall be carefully observed and determined.
4.7.5.2
lure to pass shock test .
The hose reel shall have failed the
shock tests in the event of the following:
(a) Breakage of any parts including mounting bolts.
(b) Appreciable distortion or dislocation of any parts, including
mounting feet and bearings.
(c) Excessive unbalance determined as specified in 4.7.5.1.
(d) Failure to pass the hydrostatic test.
4.7.6 Possib le test failures .
Possible test failures of the reels shall be
determined as follows:
(a) Operating test
- failure of reel to contain the specified length
of hose, evidence of bending, wobbling, or
binding when loaded reel is rotated.
(b) Hydrostatic test - evidence of leakage or binding of the seals when
the indicated hydrostatic pressure is applied
to the fluid handling section of the reel.
evidence of leakage or binding of the seals when
(c) Water
the specified fluid handling section is
applied to the fluid-carrying portion of the
reel.
4.8 Inspection of packaging.
Sample packages and packs, and the inspection
of the presentation, packing and marking for shipment stowage and storage shall be
in accordance with the requirements of section 5 and the documents specified
therein.
PACKAGING
5.
(The packaging requirements specified herein apply only for direct Government
acquisition.
For the extent of applicability of the packaging requirements of
referenced documents listed in section 2, see 6.5.)
5.1 Pres ervationn.
Presentation shall be level A or commercial, as specified
(see 6.2).
5.1.1 Level A.
Reels or hose guides shall be individually unit protected in
accordance with MIL-P-116 method 111. All openings shall be sealed with blank
flanges, threaded plugs or caps or pressure sensitive waterproof tape.
Tape shall
conform to PPP-T-60 type IV, color optional.
Reels or hose guides shall be individually unit protected
5.1.2 Commercial
in accordance with ASTM D 3951.
5.2 Packing.
Packing shall be level A, B, C, or commercial, as specified
(see 6.2).
14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals