|
| MIL-R-39016/39F
Electrical data:
Insulation resistance: 1,000 megohms minimum, except the resistance between coil and case at high
temperature shall be 500 megohms, or greater.
Dielectric withstanding voltage:
Sea level:
Between case, frame, or enclosure, and all
contacts in the energized and deenergized positions - - - - - - - -
1,000 V rms (60 Hz)
Between case, frame, or enclosure and coils - - - - - - - - - - - - -
500 V rms (60 Hz)
Between all contacts and coil(s) - - - - - - - - - - - - - - - - - - - - - -
1,000 V rms (60 Hz)
Between open contacts in the energized and deenergized
positions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
500 V rms (60 Hz)
Between contact poles - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1,000 V rms (60 Hz)
Altitude:
Between all terminals to case - - - - - - - - - - - - - - - - - - - - - - -
350 V rms (60 Hz)
Environmental data:
Temperature range: -65C to +125C.
Vibration (sinusoidal): Method 204, MIL-STD-202. Contact chatter shall not exceed 10 s maximum for closed
contacts, and 1 s maximum closure for open contacts.
Vibration (random): Method 214, MIL-STD-202, test condition IG. Contact chatter shall not exceed 10 s
maximum for closed contacts, and 1 s maximum closure for open contacts.
Shock (specified pulse): Method 213, MIL-STD-202, test condition A, 50 g's, (see figure 1, HFM); test condition
B, 75 g's, (see figure 1, RVFM and NM). Contact chatter shall not exceed 10 s maximum for closed contacts
and 1 s maximum closure for open contacts.
Resistance to soldering heat: Applicable.
Physical data:
Terminals: See figure 1 and table I.
Terminal strength: 3 pounds 0.2 pound (pull).
Solderability: Applicable.
Dimensions and configurations: See figure 1.
Weight: 30 grams (1.06 ounce) maximum.
Identification marking (full): Applicable.
6
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |