 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-63322A(R)
MIL-STD-105
Sampling Procedures And Tables For
Inspection By Attributes
MIL-STD-202
Test Methods For Electronics And
Electrical Component Parts
MIL-STD-883
Test Methods And Procedures For
Microelectronics
MIL-STD-1188
Commercial Packaging Of Supplies And
Equipment
Marking Of Electrical And Electronic
MIL-STD-1285
Parts
DRAWINGS
U.S. ARMY ARMAMENT REASEARCH AND DEVELOPMENT COMMAND
9292966 -
Resistor Network, Fixed, Film
3.
REQUIREMENTS
3.1 General. The manufacturer of the resistor network in
compliance with this specification shall have production and test
facilities and a quality and reliability assurance program adequate
to assure successful compliance with the provisions of this
specification, Only resistor networks which are inspected for and
meet all of the requirements specified herin shall be marked and
delivered.
3.2 Detail specification. The complete requirements for the
network shall be in accordance with Drawing (DWG) 9292966 (detailed
drawing), as specified in this detail specification, and MIL-R-83401.
3.3 Design and construction. The resistor network shall
consist of a ceramic substrate with conductors, insulating and
resistance patterns applied by thick film (TF) techniques in the
order necessary to meet the requirements of this specification. The
dc resistance between terminals shall be in accordance with the
resistance table and network schematic in detailed drawing.
3.3.1 Solderability. Terminal leads shall be free of foreign
material, flash marks, and other irregularities and conform to the
requirements of MIL-STD-202, Test Method 208.
3.3.2 Enclosure. The resistor network shall be coated and
encapsulated as specified in detailed drawing.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals