188.8.131.52.1 Formation and presentation. The formation and
p r e s e n t a t i o n o f i n s p e c t i o n l o t s s h a l l be in accordance with
Lot formation shall be established after final
inspection of rifles by the contractor and prior to conducting
tests specified in TABLE IV.
4 . 5 . 1 . 1 . 2 L o t s i z e . Unless otherwise specified herein, an
inspection lot shall consist of 1,000 rifles or a single shift's
These rifles shall be assembled
production, whichever is larger.
from lots of component parts that have met all inspection
Each inspection lot shall be
184.108.40.206.3 Lot identification.
The serial number of each rifle in
identified with a lot number.
a lot shall be recorded on the individual rifle record.
reason for rejection of any inspection lot shall be recorded.
When a rejected inspection lot is resubmitted after
reconditioning, it shall be identified as such.
The formation, size and
220.127.116.11 Parts and packaging.
presentation of inspection lots of parts and packaging shall be in
Inspection lots shall be as large as
accordance with MIL-STD-105.
practicable in consideration of quality history, manufacturing
conditions, contractor's delivery schedule, and shall be within
the limitations of MIL-W-13855.
Final examination of rifles shall be
performed by the contractor after completion of all testing of
Unless otherwise specified herein, each rifle shall be
examined for the classification of defects in 18.104.22.168.
non-conforming rifles shall be rejected and the reason for
The place of final examination and acceptance
criteria shall be as specified in the contract (see 6.1).
Rejected rifles shall be
22.214.171.124.1 Rejected rifles.
corrected by the contractor and the corrective action shall be
The rifles shall be reexamined for all defects listed
in t h e a p p l i c a b l e g r o u p s i n 4 . 5 . 2 . 2 .
When any of the following parts are
replaced to correct a non-conforming rifle, the rifles shall be
retested as indicated by asterisks: