Click here to make tpub.com your Home Page

Page Title: Relays, Reed (Mercury Wetted) General Specification For
Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Up
Relays, Reed (Mercury Wetted) General Specification For
Next
Non-Government publications



img
INCH-POUND
MIL-R-83407B
30 September 2003
SUPERSEDING
MIL-R-83407A (USAF)
2 June 1994
MILITARY SPECIFICATION
RELAYS, REED (MERCURY WETTED)
GENERAL SPECIFICATION FOR
Inactive for new design after 28 June 1996.
No superseding specification.
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the general requirements for mercury wetted reed relays that perform
the switching functions associated with ground control support equipment. These relays are not be used in
shipboard or airborne applications.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-R-83407/3
-
Relays, Reed (Mercury Wetted), All Welded, 0 To 7.5 Volt Amperes.
STANDARDS
MIL-STD-202
-
Test Method Standard Electronic and Electrical Component Parts.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center,
Columbus, Post Office Box 3990, Columbus, OH 43216-5000, or emailed to Relay@dscc.dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST Online
database at www.dodssp.daps.mil.
AMSC N/A
FSC 5945
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +