Unitized loading. Unitized loading for the ejector units
iS authorized as specified in MIL-STD-794.
All shipping containers shall be marked in
accordance with the requirements of MIL-STD-129 with the following
RACK, BOMB, EJECTOR, BRU-
MILITARY SPECIFICATION NO. MIL-R-85320(AS)
DOMESTIC OR EXPORT PACKED (AS APPLICABLE)
GOVERNMENT ORDER NO. (OR CONTRACT NO. IF-ORDER NO. IS
NAME OF SUPPLIER (AND NAME OF MANUFACTURER IF NOT THE
MANUFACTURER'S CODE IDENTIFICATION NUMBER
Intended use. Type I ejector units covered by this
specification are intended for use in helicopters. Type II
units covered by this specification are intended for use in all types of
They are mounted externally in the aircraft wing pylon or
They are intended for use on either land-based or carrier-
Procurement documents shall specify the
Title, number and date of this specification.
Selection of applicable levels of preservation,
packaging and packing required (see 5.1 and 5.2).
Samples subjected to sampling inspection shall not
be considered or accepted as part of the contract
Sampling inspection selection (see 4.4.2).
Number of samples and inspection sequence for pro-
duction lots in excess of 300 units (see Table III).
Applicable drawing package for type of ejector unit
required (see 3.5.1).