 |
|||
|
|
|||
| ||||||||||
|
|  MIL-R-85325(AS)
Repeat b. with a 1,621 kilogram (3,575 pound) store
f.
suspended from the 762 millimeter (30 inch) hooks.
The store shall release with a maximum of 28 Newton-
meters (250 inch-pounds) torque applied to the
manual release.
With the bomb rack cocked and the hooks latched,
g.
apply a 66,723 Newton (15,000 pound) vertical down
static load on the 355.6 millimeter (14 inch) hooks
using standard bomb lugs conforming to MS3314. Con-
centrate the load midway between the hooks. The
hooks shall hold the load.
Repeat g. with an 88,964 Newton (20,000 pound) load
h.
on the 762 millimeter (30 inch) hooks.
i.
Cock the bomb rack and insert the safety pin. Load
the ejector assembly with two applicable impulse
Suspend a 113 kilogram
cartridges (see 6.2.1k).
(250 pound) store from the 355.6 millimeter (14
inch) hooks. Remove the safety pin and apply 28 VDC
to the bomb rack.
The impulse cartridges shall
ignite. and the store shall be ejected. Remove,
disassemble, clean and inspect the ejector assembly
and surrounding areas of the bomb rack as indicated
in the applicable manuals (see 6.2.1g). There shall
be no damage to the bomb rack.
Repeat i. with two applicable impulse cartridges
(see 6.2.1k) in the ejector assembly and a 1,621
kilogram (3,575 pound) store suspended from the 762
millimeter (30 inch) hooks.
4.6.3
Additional tests. The bomb rack shall pass the following
tests of MIL-T-7743 as specified, except as modified herein.
When
required, the minimum operating voltage shall be as defined herein (see
4.6.3.2). Applicable impulse cartridges shall be used when required (see
6.2.1k).
a.
Manual Function (see 4.6.3.1)
b.
Electrical Characteristics (see 4.6.3.2)
c.
Lag Determination (see 4.6.3.3)
d.
High-g Release (see 4.6.3.4)
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals