14 inch suspension - perform 12 ejections with the applied
load based on a 1,000 pound store.
30 inch suspension - perform 13 ejections with the applied
load based on a 2,600 pound store.
This test shall be conducted in accordance with the
life test for explosive items. A 500 pound store shall be used with 14-
inch hooks and a 2,600 pound store shall be used with the 30-inch hooks.
This test shall be conducted on the 30-inch
220.127.116.11 Stress corrosion.
6.5.13. Humidity. The bomb rack shall meet the requirements of this
specification during and after exposures to this enviromental
18.104.22.168 Fungus. The bomb rack shall be tested with the hooks in the
The bomb rack shall meet the requirements of this
specification during and after exposure to the fungus growth test.
22.214.171.124 Lock shut firing. The bomb rack shall retain the store after
the following test. There shall be no damage to the bomb rack.
Suspend a 2,600 pound store from the 30-inch hooks.
Place the safety selector handle in the-locked position or
lock the IFOBRL electrically.
Install two CCU-45/B cartridges in the breech chambers.
Install the cartridge chambers in the breech and tighten until bottomed.
Ignite the impulse cartridges by applying 28 VDC (+) to pins J
and H, and 28 VDC (-) to pins K and G of connector J1.
126.96.36.199 Static test. This test shall be conducted with the following
conditions. Yield load shall be 1.15 times and ultimate loads 1.5 times
the limit load given in Table V. The combined loads and moments shall
be applied to a rigid simulated store of negligible weight in accordance
with Table V such that they act at the store center of gravity.
Salt spray/altitude. The bomb rack shall meet the
requirements of This specification during the altitude test and after
exposure to the salt spray.