Click here to make tpub.com your Home Page

Page Title: Order of precedence
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Other Government documents, drawings, and publications
Up
Signals, Illumination, Aircraft Double-star An-M27A2 Through AN-M42A2
Next
Air leakage test



img
MIL-S-1398E(AR)
2.1.3 Order of precedence.  In the event of a conflict between
the text of this specification and the references cited herein, the
text of this specification shall take precedence.
REQUIREMENTS
3.
3.1 Material.  Material and parts shall be in accordance with
the applicable drawings and specifications.
.
3.2 Assembly.  The assembly shall comply with all requirements
specified on Drawing (dwg.) 8847462 and with all requirements
specified in applicable specifications.
.
3.3 Moisture content.
3.3.1 Star charqe composition.  The moisture content of the red
star charge composition at the loading station shall not exceed 0.1
percent and the moisture content of the green and yellow star charge
compositions at the loading station shall not exceed 0.5 percent
when determined as specified in 4.5.1.1.
3.3.2 Black powder.  The moisture content of the black powder,
at the loading station at the time of loading the signals, shall not
exceed 0.3 percent when determined as specified in 4.5.1.2.
3.3.3  Paper, and chipboard components.  The moisture content of
the paper, and chipboard components, at the loading station at the
time of loading the signals, shall not exceed 6 Percent when
determined as specified in 4.5.1.3.
3.3.4 Polypropylene felt.  The moisture content of the
polypropylene felt components, at the loading station at the time of
loading shall not exceed 0.1 percent when determined as specified in
4.5.1.3.
3.4 Transportation vibration.  The signal assemblies shall
comply with the following requirements.
3.4.1 The signal assembly shall not function during the test.
3.4.2 The signal assembly shall be safe to transport followinq
the test (see 6.7).
3.4.3 There shall be no evidence of external damaqe to the
signal assembly that will affect the intended function (see 6.8).
3.4.4 There shall be no evidence of damage in the packinq or
packaging that would affect the storage life of the signal
assemblies.
3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +