 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-1399E(AR)
3.7 First article inspection. This specification contains
technical provisions for first article inspection. Requirements for
the submission of first article samples by the contractor shall be
as specified in the contract.
3.8 Workmanship. All parts and assemblies shall be fabricated
and loaded in a thorough, workmanlike manner. They shall be free of
burrs, sharp edges, cracks, dirt, rust, and other foreign matter.
The cleaning method used shall not be injurious to any part nor
shall the parts be contaminated by the cleaning agent. Exterior
surface coatings shall be continuous except for a few light
scratches not exposing base material. All required markings shall
be neat and sharply defined.
QUALITY ASSURANCE PROVISIONS
4.
4.1 Responsibility for inspection and standard quality
assurance provisions. Unless otherwise specified herein or in the
contract, the provisions of MIL-A-48078 shall apply and are hereby
made a part of this detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item:
a.
First Article Inspection
b.
Quality Conformance Inspection
4.3 First article inspection.
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of the following items in sample quantities as indicated.
4.3.2 Inspections to be performed.
See MIL-A-48078 and Table I
specified herein.
See MIL-A-48078.
4.3.3 Rejection.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals