 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-1399E(AR)
6.6 Cost of check test. The Contracting Officer should arrange
for the contractor to be reimbursed for the expense incurred in the
performance of the check test. The tests shall be conducted at
Government expense without cost to the contractor who loaded the
-
primer or to the contractor assembling the primers in the signals `
and shall not constitute a basis for rejection against either
contractor except where deterioration has occurred as a direct
result of carelessness in handling, storage, etc., permitted while
the primer lots where under the jurisdiction of either contractor.
6.7 Safe to transport. The signal assembly will be considered
safe to transport providing no evidence exists of loose powder or
composition in the box, or missing, loose or protruding primers.
6.8 Signal free of damage. The signal assemblies will be
considered free of damage that will affect the intended function
provided the top seal has not been broken by movement or
displacement of the top, or the case side has not been distorted
sufficiently to prevent ejection of the star assembly.
6.9 Identification of international standardization agreements.
Certain provisions of this specification are the subject of
international standardization agreement STANAG 3398-Air Pyrotechnics
Interchangeability Chart. When amendment, revision, or cancellation
of this specification is proposed, the departmental custodians will
inform their respective Departmental Standardization Officers sc
that appropriate action may be taken respecting the interns-t-'ibnal..
agreement concerned.
6.10 Test summary.
Test
Requirements
Lot
Sample Size
Functioning
See Table IV
First Article
30 of each color
Regular production
(First three con-
secutive acceptable
Functioning
lots)
See Table IV
240
Functioning
See Table IV
Remaining
80
Preparing activity:
Custodian:
Army-AR
Army-AR
(Project 1370-A172)
32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals