 |
|||
|
|
|||
| ||||||||||
|
| MIL-S-1419D (PA)
The Government reserves the right to terminate its inspection
upon encountering any failure of an Item in the sample to comply
with any or all requirements.
4.3 Inspection provisions
4.3.1 Lot formation. - The term "inspection lot" as used In
this specification is defined as an essentially homogeneous col-
lection of units of product from which a representative sample
is drawn and inspected to determine conformance with applicable
requirements. The sample selected shall represent only that
quantity of units from which the sample was drawn and shall not
be construed to represent any prior to subsequent quantities
presented for inspection. Homogeneity shall be considered to
exist provided the Inspection lot has been produced by one manu-
facturer In one unchanged process, using the same materials and
methods in accordance with the sane drawings, same drawing
revisions, same specifications, and same specification re-
vision and complies with the provisions for submission of
product as specified in MIL-STD-105. Changes to the process,
specifications, or drawings not affecting safety, performance,
interchangeability, or storage, as determined by the Government,
shall not be deemed to alter the homogeneity of and inspection
lot . All material submitted for inspection in accordance with
this specification shall comply with the homogeneity criteria
specified herein regardless of the type Of sampling procedure
which is being applied to determine conformance with requirements.
Lot numbering, as required, shall be in accordance with MIL-STD-
1168. Each inspection lot of loaded signals shall contain:
8
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals