|
| MIL-S-1419D (PA)
Minor:
AQL 1.00 percent
02007
Crimp not full 360 degrees ..... Visual
201.
Evidence of poor workmanship
202.
(see 3.7) . . . . . . . . . . . . . . . . Visual
02006
4.3.2.5 Top (see dwg. 8847473 covering a detail of dwg.
8847467).
Categories
Method of
Code No.
Defects
Inspection
None defined
Critical:
AQL 0.40 percent
Major:
Visual
03001
101.
Crack or split . . . . . . . . . . . . . . ..
AQL 2.50 percent
Minor:
03002
Gage
201.
Thickness . . . . . . . . . . . . . . . . . . . . . . .
03003
202.
Outside diameter at datum height.
Gage
03004
203.
Protrusion of sides above bottom.
Gage
03005
204.
Length of sides . . . . . . . . . . . . . . . .
. Gage
205.
Bare spot in protective coating
03006
Visual
or coating missing ..............
Evidence of poor workmanship
206.
Visual
03007
(see 3.7) . . . . . . l . . . l l . l e. l l l l l l .
`
*4.3.2.6 Assembly, prior to inserting star assembly
retaining washer, and wad-disc assembly (see dwg. 8847467).
Code No.
Method of
Defects
Categories
Inspection
Critical:
04001
1. Propelling charge missing . . . . . . . . . Visual
2. Propelling charge weight less
04004
than min. (see note) . . . . . . . . . . . . . . Balance
None defined
Major:
Minor:
AQL 0.65 percent
201.
Evidence of poor workmanship
04003
(see 3.7) l O l * l l ** l l l l l l * . l ** . l ** Visual
NOTE : Volumetric weighing may be utilized as a substitute for
precise weighing following qualification. Qualification shall
consist of' precise weighing until such time as twenty-five hundred
11
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |