with the switchboards. Flatness, perpendicularity, and parallelism of the overall
switchboard shall conform to 126.96.36.199. Assembly procedure outlined in NAVSEA SE
670-FO-MMO-O10/Swbds shall be followed.
4.7 Test procedures and test reports. The contractor shall prepare test
procedures and test reports in accordance with the data ordering documents
included in the contract or order (see 6.2.2).
4.8 Inspection of packaging. Sample packages and packs and the inspection
of the preservation-packaging, packing, and marking for shipment and storage shall
be in accordance with the requirements of section 5 and documents specified
(The preparation for delivery requirements specified herein apply only for
direct Government acquisition. For the extent of applicability of the prepara-
tion for delivery requirements of referenced documents listed in section 2,
5.1 Switchboards and control indicators. Types II, IV, VI, VII, VIII, IX,
X, XI, and XII switchboard sections, types III, V, and XI switchboards, and
control indicators shall be prepared for delivery in accordance with the require-
ments specified in 5.1.1 through 188.8.131.52 for the level of shipment as specified
184.108.40.206 Level A. Packaging shall be in accordance with submethod IIa of
MIL-P-116. An inspection window shall be required.
220.127.116.11 Level C. Packaging shall protect against corrosion, deterioration,
and physical damage during shipment from the supply source to the using activity.
5.1.2 Packing. Types II, IV, VII, VIII, IX, X, and XII switchboards shall
be placed in the shipping containers horizontally or vertically. Type VI switch-
board sections may be placed in the shipping containers on a side. Drip shields
shall be packed with the switchboard.
18.104.22.168 Level A. Each type II, IV, VI, VII, VIII, IX, X, XI, and XII
switchboards shall be packed horizontally or vertically in boxes conforming to
type I of MIL-B-26195. Each box shall be provided with an inspection window
with readily removable cover opposite the inspection window in the barrier bag
(see 22.214.171.124). Each type III, V, and XI switchboard and each control indicator
shall be packed in a box conforming to overseas type of PPP-B-601 or class 2
126.96.36.199 Level C. Types II, IV, VI, VII, VIII, IX, X, XI, and XII switch-
boards packaged as specified (see 188.8.131.52), shall be mounted horizontally or
vertically on wood shipping skids of a type and style to ensure acceptance by
common carrier and to permit forklift truck handling from either side. Type
III, V, and XI switchboards and control indicators shall be packed to ensure
acceptance by common carrier and in compliance with the Uniform Freight Clas-
sification Ratings, Rules, and Regulations.