Whether provision is to be made for connection of bus failure
alarm (see 22.214.171.124).
Whether ships cable connectors are required for control indica-
tors (see 126.96.36.199).
Bus bar stresses (see 188.8.131.52).
Number of wiring fixtures required, if any (see 3.8).
Engineering services required (see 3.11).
Quality program in accordance with MIL-Q-9858 (see 4.1.1).
Levels of packaging, packing, and marking required (see 5.1, 5.2,
5.3, and 5.4).
Listing of applicable electrical drawings to be included in the
ATDP provided with the IFB (see 6.5.9).
6.2.2 Data requirements. When this specification is used in an acquisition
which incorporates a DD Form 1423, Contract Data Requirements List (CDRL), the
data requirements identified below shall be developed as specified by an
approved Data Item Description (DD Form 1664) and delivered in accordance with
the approved CDRL incorporated into the contract. When the provisions of DAR
7-104.9 (n)(2) are invoked and the DD Form 1423 is not used, the data speci-
fied below shall be delivered by the contractor in accordance with the contract
or purchase order requirements. Deliverable data required by this specifica-
tion is cited in the following paragraphs.
Data requirement title
Applicable DID no.
Nonstandard part approval
additions to an approved
program parts selection
Report, contractor engi-
neering and technical
Drawings, engineering and
Drawing number -
Delivery of hard
copies - contracting
Notice of revision/
Engineering change pro-
posals (ECPs) and requests
for deviations and waivers