6.5.8 Description plate. A description plate is a plate that is marked
to show panel assembly number, panel assembly nomenclature, and switch operating
position information. The switch position dial is also a description plate.
188.8.131.52 Revision record card. A revision record card is a description
plate that will contain a list of the detail schematic wiring diagrams, the
front panel layout, back section terminal layout or back section connector
location drawings with the revision letter of each drawing.
6.5.9 Acquisition technical data package. The Acquisition Technical Data
Package (ATDP) to be provided by the Government with an Invitation for Bids (IFB)
will consist of the data list, a set of detail schematic wiring diagrams, the
front panel layout, the back section terminal layout or back section connector
location, the wiring details, the parts list (electrical), and a mechanical
guidance drawing. The content and purpose of these drawings is defined in
184.108.40.206 through 220.127.116.11. The electrical drawings will contain all termination
data required to completely wire the switchboard. These drawings will be
assigned Government drawing numbers and will be under the configuration
control of the Government (see 6.2.1).
18.104.22.168 Data list. The data list provided in the ATDP should be updated
by the switchboard manufacturer to include all drawings applicable to the switch-
boards under the contract along with the titles and revision letters of the added
Government standard drawings (such as Drawing 815-1853048 covering LS
switches) shall be included.
22.214.171.124 Detail schematic wiring diagrams. Detail schematic wiring dia-
grams (DSWD's) shall be in the form shown in requirement 20 of MIL-STD-1657.
DSWD's shall contain the applicable rear terminal, rear module connector, panel
connector, internal switch contact, internal panel assembly and intersection
connector-designations for each circuit through the switchboard as described
in requirement 20 of MIL-STD-1657.
126.96.36.199 Front panel layout. Front panel layout drawing shall show the
location of panel-mounted assemblies on the switchboard. The function of each
part (fuse, indicator light, relay, transformer, or circuit breaker) and legend
of each switch description plate shall be shown.
188.8.131.52 Back section terminal arrangement (types II, III, VI, VIII, X and
XI switchboards. Arrangement of back section terminal boards (modules shall
show the position and designation of terminals to which ship wiring is con-
nected. Ship wire designations shall be shown with the corresponding terminal
board terminals. Internal switchboard wiring that connects to the back section
terminal boards shall be shown.
184.108.40.206 Back section connector location.
220.127.116.11.1 Type IV, V, and XII switchboards. This drawing shall show the
location, shell size, and insert rotation of ship cable connectors for each
section. The ship cable number and type shall be shown.