 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-19557/8(AS)
APPLICABLE
PARAGRAPH OF
SPECIFICATION
Altitude: The starter shall be capable of meeting rated
3.5.8
speed and output torque at 8000-ft altitude at rated
inlet conditions. The starter shall not be damaged
when subjected to 75,000-ft altutude in the overrunning
mode of operation.
Attitude: The starter shall be capable of meeting the
3.5.9
operational requirements of this specification when
the starter centerline, taken through the output shaft,
is in any position, within 10 degrees of the horizontal
position, unless specified otherwise on this Specifica-
tion Sheet.
Initial Calibration:
4.5.4
Drive Speed
Drive Speed
Drive Torque
Condition
(RPM)
(Lb-Ft)
o
stall
415 Min, 500 Max
255 Min ------
Rated
1800
145 Min ------
3200 Min
cutout
Drive Speed
Airflow, Max
Drive Speed
Condition
(Lb per Min)
(RPM)
0
stall
120
.
No-Load Op eration:
4.5.5
.
Time (See): 60
Minimum Drive Speed (RPM): 4900
Endurance Test: Number of cycles: 1200. Each cycle
3.3.5
shall consist of three consecutive phases as follows:
*Last 600 cycles only; run at 800F air inlet temperature.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals