 |
|||
|
|
|||
| ||||||||||
|
| MIL-S-26688(USAF)
4.1 CLASSIFICATION OF TESTS - The inspection and testing of
the seats shall be classified as follows:
a. Reproduction Tests.- Preproduction tests are those
tests performed on samples submitted for approval.
b. Acceptance Tests.- Acceptance tests are those tests
performed on individual lots that have been submitted for acceptance
under contract.
4.2 PREPRODUCTION TESTING
4.2.1 PREPRODUCTION TEST SAMPLE TESTED BY THE CONTRACTOR.- The
contractor shall subject one seat of each type to the preproduction
test specified in 4.2.4.
4.2.2 PREPRODUCTION TEST REPORT. - After the contractor completes
the preproduction tests, he shall prepare a preproduction test report
according to MIL-T-9107 and furnish three complete copies of the
report to the procuring activity.
4.2.3 PREPRODUCTION TEST SAMPLE FOR THE PROCURING ACTIVITY.-
Along with the preproduction test report the contractor shall submit
a sample seat to the procuring activity.
4.2.4 PREPRODUCTION TESTS.- Preproduction tests shall consist
of all tests described under "Test Methods."
4.3 ACCEPTANCE TEST. - Acceptance tests shall consists of:
a
Individual
tests
b. Sampling plans and tests
4.3.1 INDIVIDUAL TESTS.- Each seat shall be subjected to the
test as described under 4.4.1, "Examination of Product."
4.3.2 SAMPLING PLANS AND TEST.- Sample seats shall be selected
at random from each lot on the same material order, in the quantities
specified below, for compliance with the tests in 4.4, "Test Methods,"
except that proof loads shall be applied instead of ultimate loads:
a. Two seats from each lot of 200 or fraction thereof.
b. Three seats from each lot of 500 or fraction thereof
above 200.
c. One seat from each additional 500 or fraction
thereof above 500.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals