 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-3644B
MILITARY
Preservation, Methods of.
MIL-P-116
Anodic Coatings, for Aluminum and Aluminum Alloys.
HIL-A-8625
Finishes for Ground Signal Equipment.
MIL-F-14072
STANDARDS
MILITARY
MIL-STD-105
Sampling Procedures and Tables for Inspection by
Attributes.
Marking for Shipment and Storage.
MIL-STD-129
Cushioning, Anchoring, Bracing, Blocking, and
MIL-STD-1186
Waterproofing; with Appropriate Test Method of.
*
(Copies of specifications and standards required by manufacturers in connec-
tion with specific acquisition functions should be obtained from the contract-
ing activity or as directed by the contracting officer.)
*
2.2 Other publications . The following document(s) form a part of this
specification to the extent specified herein. The issues of the documents
which are indicated as DoD adopted shall be the issue listed in the current
DoDISS and the supplement thereto, if applicable.
NATIONAL BUREAU OF STANDARDS
Handbook H28
Screw-Thread Standards for Federal Service.
(Application for copies should be addressed to the Superintendent of Docu-
ments , Government Printing Office, Washington DC 20402.)
*
AMERICAN SOCIETY FOR TESTING AND MATERIALS
Zinc on Iron and Steel, Electrodeposited Coating of
ASTM B 633
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
UNIFORM FREIGHT CLASSIFICATION COMMITTEE
Uniform Freight Classification Rules
(Application for copies should be addressed to the Uniform Classification
Committee, 202 Chicago Union Station, Chicago, IL 60606.)
*
In the event of a conflict between the text of
2.3 Order of precedence.
this specification and the references cited herein, the text of this specifi-
cation shall take precedence.
REQUIREMENTS
3.
*
3.1 First article. When specified (see 6.2), the manufacturer shall
furnish one complete shaft, flexible, tuning assembly for first article inspec-
tion- The first article may be either a first article model or an initial
production item which conforms to the requirements of this specification. In
either case, the approved first article and the production items shall be
identical and in accordance with the terms of the contract. Approval of the
first article shall not relieve the manufacturer of the responsibility to
furnish items in accordance with the requirements of this specification.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals