 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-3644B
5.1.2 Level C.
Cleaning, drying, preservation and unit protection shall
be in accordance with manufacturer's commercial practice.
Packing shall be level A, B or C as specified (see 6.2).
5.2 Packing.
5.2.1 Level A.
A tuning shaft packaged as specified in 5.1 shall be packed
in an overseas type shipping container conforming to PPP-B-601. The container
shall be uniform size and shape and minimum tare and cube. Closure and
strapping shall be in accordance with the appendix to PPP-B-601.
5.2.2 Level B. Level B packing shall be the same as Level A except that
the shipping container shall be domestic type.
5.2.3 Level C. The tuning shaft packaged aa specified in 5-1 shall be
packed in a manner to insure carrier acceptance and safe delivery at destina-
tion. Containers shall be in accordance with Uniform Freight Classification
Rules or regulations of other carriers applicable to the mode of transporta
tion.
5.3 Physical protection. Interior cushioning, anchoring, blocking and
bracing shall be in accordance with MIL-STD-1186.
5.4 Marking.
In addition to any special marking required by the contract
or order, interior containers and shipping containers shall be marked in
accordance with the requirements of MIL-STD-129.
6.
NOTES
6.1 Intended use. The tuning shaft covered by this specification is
intended for manually-operated remote control of electronic and communication
equipment used in aircraft. The tuning shaft is capable of operation in both
clockwise and counter-clockwise directions.
6.2 Ordering data.
Procurement documents should specify the following:
a.
Title, number and date of this specification.
b.
First article, when required (see 3.1).
c.
Classification of inspection if different (see 4.2).
d.
First article inspection, if different (see 4.2.1).
Quality conformance inspection, if different (see 4.2.2).
e.
f.
Product examination, if different (see 4.2.3).
g. Selection of applicable level of preservation, packaging, and packing
required (see 5.1 and 5.2).
6.2.1 Indirect shipments. The packaging, packing, and marking specified in
Section 5 apply only to direct purchases by or direct shipments to the Govern-
ment and are not intended to apply to contracts or order between the manufac-
turer and prime contractor.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals