Click here to make tpub.com your Home Page

Page Title: Responsibility for inspection.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-S-43292D
3.3 Constructions and assembly.  The end item shall conform to the
requirements of this document and to the designs, details, and dimensions shown
or specified on the applicable drawings.
3.3.1 Stitching.  Stitching shall conform to FED-STD-751. Stitch types shall
be as specified on the applicable drawing. Thread breaks, bobbin runouts, or
two or more consecutive skipped stitches shall be overstitched not less than
1/2 inch each end, except for type 308 stitching, which shall be overstitched
two or three stitches.  Runoffs shall be restitched to conform to the required
stitch pattern.  Backstitching is not required when ends of type 301 stitching
are turned under in a hem or held down by other stitching.  Thread tension shall
be maintained so that there will be no loose stitching resulting in a loose
bobbin or top thread or excessively tight stitching resulting in puckering of
the materials sewed.  The lock will be imbedded in the materials sewed. All
thread ends shall be trimmed.
3.3.1.1 Automatic stitching.  Automatic stitching machines may be used to
perform any of the required stitch patterns provided the requirements for stitch
pattern, stitches per inch, and size and type of thread are met, and at least
three or more tying, overlapping, or backstitches are used to secure the ends
the stitching.
3.4 Workmanship.  The end item shall conform to the quality of product
established by this specification.
4.
QUALITY ASSURANCE PROVISIONS
4.1  Responsibility for inspection.  Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the performance
all inspection requirements (examinations and tests) as specified herein.
Except as otherwise specified in the contract or purchase order, the contractor
may use his own or any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by the Government.
The Government reserves the right to perform any of the inspections set forth in
this specification where such inspections are deemed necessary to ensure
supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance.  All items shall meet all reqirements
of sections 3 and 5.  The inspection set forth in this specification shall
become a part of the contractor's overall inspection system or quality program
The absence of any inspection requirements in the specification shall not
relieve the contractor of the responsibility of ensuring that all products or
supplies submitted to the Government for acceptance comply with all requirements
of the contract.  Sampling inspection as part of manufacturing operations, is
an acceptable practice to ascertain conformance to requirements, however, this
does not authorize submission of known defective material, either indicated or
actual, nor does it commit the Government to accept defective material.
4

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business