 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-43292D
Defect
Examine
Exceeds maximum load limits
Weight
omitted; incorrect; illegible; of improper
Marking
size, location, sequenece, or method of
application
PACKAGING
5.1 Preservation. Preservation shall be level A or Commercial, as
specified (see 6.2).
5.1.1 Level A preservation.
5.1.1.1 Static lines.
5.1.1.1.7 Type I static lines. Each static line shall be lap folded to
form a compact bundle measuring approximately 11-1/2 by 3-1/2 by 2-1/2 inches.
The bundle shall be securely tied at each end with twine conforming to type I
or II, 8-ply of T-T-871. Each static line shall be unit packed in a close-
fitting, 0.003 inch minimum thickness polyethylene bag conforming to type I or
II, grade A, style 1 of PPP-B-26. Prior to or during the final closure
operation, excess air within the bag shall be expelled.
5.1.1.1.2 Type II static lines. Each static line's pilot chute panel
portion shall be laid out flat with the outer loops facing up. The braided
line shall be placed within the panel pockets. The panel shall then be folded
over the webbing. Starting with the folded panel portion, the static line
shall be lap folded in approximately 16-inch increments. The completely
folded static line, measuring approximately 16 by 3 by 2-1/2 inches, shall be
securely tied at each end with the twine specified in 5.1.1.1.1. One of the
ties shall immobilize the clevis assembly. Each static line shall be unit
packed as specified in 5.1.1.1.1.
5.1.1.1.3 Type III static lines. Each static line's release line shall be
tightly coiled back to the sleeve and secured with twine specified in
5.1.7.1.1. Each static line shall then be completely coiled or lap folded,
starting from the release knife end. The static line shall then be securely
tied at each end and in the center with the specified twine to form a bundle
measuring approximately 14-inches in length, 5-1/2 inches in width, and
2-1/4 inches in depth. Each static line shall be unit packed as specified in
5.1.1.1.1.
5.1.1.1.4 Type IV static lines. Each static line shall be tightly coiled
with the clevis assembly positioned on the top to form a bundle measuring
approximately 6-1/2 by 2-3/4 by 1-3/4 inches. The bundle shall be securely
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals