 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-43292D
tied with twine conforming to type I or II, 8 ply of T-T-871. The tie shall
immobilize the clevis assembly. Each static line shall be unit packed as
specified in 5.1.1.1.1.
5.1.1.2 Connector web assembly.
5.1.1.2.1 Unit pack. Each connector web assembly shall have the connector
link and clevis folded down flat onto the same side of the connector web.
5.1.1.2.2 Intermediate pack. Fifteen connector web assemblies, unit packed
as specified in 5.1.1.2.1 shall be packed in an intermediate fiberboard box
conforming to style RSC, grade 200 of PPP-B-636. Inside dimensions of each
intermediate box shall approximate 8-1/4 inches in length, 7-3/4 inches in
width, and 6 inches in depth. The box shall be closed in accordance with
Method I as specified in the appendix of PPP-B-636.
5.1.2 Commercial preservation. Static lines and connector web assemblies
shall be preserved in accordance with ASTM D 3951.
5.2 Packing.
Packing shall be level A, B, or Commercial as specified (see
6.2).
5.2.1 Level A packing.
5.2.1.1 Static lines. Static lines of one type only, preserved as
specified in 5.1, shall be packed in quantities as specified in table I within
a shipping container conforming to overseas type, style A or I, type 2 load of
PPP-B-601. Level A unit pack arrangement within a shipping container, and
approximate shipping container inside dimensions, shall be as specified in
table I. Each shipping container shall be closed andreinforced in accordance
with the appendix of PPP-B-601.
5.2.1.2 Connecter wet assembly. One hundred and twenty connector web
assemblies, preserved as specified in 5.1, shall be packed in a shipping
container conforming tO overseas type, style A or I, type 2 load of PPP-B-601.
Level A intermediate packs shall be packed flat, two in length, two in width,
and two in depth within a shipping container. Inside dimensions of each
container shall be approximately 17 inches in length, 16 inches in width and
12 1/2 inches in depth. Approximate dimensions are furnished as a guide only.
Each shipping container shall be closed and reinforced in accordance with the
appendix of PPP-B-601.
5.2.2 Level B packing.
5.2.2.1 Static lines. Static lines of one type only, preserved as
specified in 5.1, shall be packed in quantities as specified in table I within
a shipping container conforming to style RSC-L, type CF (variety SW) or SF,
class domestic, grade 275 of PPP-B-636. The inside of each fiberboard
10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals