 |
|||
|
|
|||
| ||||||||||
|
| MIL-S-48363 (PA)
a. A statement that the lot complies with all of the
quality assurance provisions specified in this specification.
b. Drawing and specification number and date, together
with identification and date of changes thereto.
c. A statement that all material purchased by the con-
tractor meets requirements when such material is controlled by
Government or commercial specifications referenced in any of the
contractual documents, and that certificates of conformance are
on file and available for review.
d. Number of items in the lot.
e. Date submitted.
The certificate shall be signed by a responsible agent of the
certifying organization. The initial certificate submitted
shall be substantiated by evidence of the agent's authority
to bind his principal. Substantiation of the agents authority
will not be required with subsequent certificates unless, dur-
ing the course of the contract, this authority is vested in
another agent of the certifying organization.
4.3 Inspection provisions
4.3.1 Lot formation. -The term "inspection lot" as used in
this specification is defined as an essentially homogeneous col-
lection of units of product from which a representative sample
is drawn and inspected to determine conformance with applicable
requirements.
The sample selected shall represent only that
quantity of units from which the sample was drawn and shall not
be construed to represent any prior or subsequent quantities pre-
sented for inspection. Homogeneity shall be considered to exist
provided the inspection lot has been produced by one manufacturer
in one unchanged process using the same materials and methods in
accordance with the same drawings, same drawing revisions, same
specifications and same specification revisions and complies with
the provisions for submission of product as specified in MIL-STD-
1050 Changes to the process, specifications, or drawings not
affecting safety, performance, interchangeability, or storage,
as determined by the Government, shall not be deemed to alter the
homogeneity of an inspection lot. All material submitted for
inspection in accordance with this specification shall comply
with the homogeneity criteria specified herein regardless of
the type of sampling procedure which is being applied to deter-
mine conformance with requirements. Lot numbering, as required,
shall be in accordance with MIL-STD-1168.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals