Click here to make tpub.com your Home Page

Page Title: Altitude
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-S-48461B(AR)
4 . 6 . 3 . 7 A l t i t u d e .  U s e item 5 of table VI, place the assembly in an
a l t i t u d e chamber and subject it to the altitude test specified in MIL-STD-810,
m e t h o d 500.1, procedure I, except that:
a. First, the assembly in a non-operating condition, shall be
e x p o s e d to an atmospheric pressure equivalent to 40000 feet above
s e a level for a period of not less than 1 hour.
b . Second, with the chamber presssure increased to an atmospheric
e q u i v a l e n t to 10000 feet above sea level, subject the assembly to
the performance tests of 4.6.2..
4.6.3.8 D u s t . Subject the assembly to the dust test specified in
MIL-STD-810, method 510.1, procedure I.  A t t h e c o n c l u s i o n o f t h i s t e s tr
s u b j e c t the assembly to the performance test- of 4.6.2.
4 . 6 . 3 . 9 S a l t f o g .  S u b j e c t the assembly to the corrosion test specified
i n MIL-STD-810, method 509.1, procedure I.  A t t h e c o n c l u s i o n o f t h i s t e s t ,
s u b j e c t the assembly to the performance tests of 4.6.2.
4 . 6 . 4 S e a l i n g .  P r e s s u r i z e the assembly with nitrogen to 5.0 + 0.1 psig
a n d perform either Sealing A or Sealing B leakage test.  A f t e r  determination
o f compliance with the sealing requirement, purge the assembly with dry
n i t r o g e n at 1 psig for not less than 5 minutes and lower the pressure to 0.0 +
0 . 2 - 0.0 psig.  N i t r o g e n shall be BB-N-411, t y p e I, class 1, grade B with a
d e w p o i n t not greater than -25F.
4 . 6 . 4 . 1 T e s t s e l e c t i o n .  A p p l i c a t i o n of Sealing A and Sealing B shall be
a s determined by the procurement conditions of 4.5.1 and the first article
c o n d i t i o n s of 4.4.
4 . 6 . 4 . 2 S e a l i n g A. Use item 1 of table VI and subject the assembly to
t h e leakage (immersion) test specified in MIL-STD-810, method 512.1, procedure
IV.  The  immersion  period  shall  be  not  less  than  5  minutes.
4 . 6 . 4 . 3 S e a l i n g B. Use item 1 of table VI, place the assembly in the
f o l l o w i n g environment for not less than 2 hours and verify that the pressure
d r o p is not greater than 0.2 psig.
73 + 2.5F
a. Temperature
b. Relative humidity
5 0 percent 5 percent
2 8 . 5 + 2.0 - 3 . 0 in. Hg.
c. Atmospheric pressure
18

Privacy Statement - Press Release - Copyright Information. - Contact Us