 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-52986(ME)
5.1.2 Level B. Each complete scraper, components, and attachments shall be
preserved in accordance with the level B preservation and packaging requirements
of MIL-T-3351.
5.1.3 Commercial. Each complete scraper and all items issued with the
scraper shall be suitably preserved and packed in accordance with MIL-STD-1188
for retail distribution directly to a using customer and in a manner to assure
carrier acceptance and safe delivery to destination at lowest ratings in com-
pliance with carrier rules and regulations applicable to the mode of transport-
ation. In addition, the following specific requirements shall be accomplished.
Items with critical surfaces required for fit or function shall be provided pro-
tection by the use of preservative coatings, volatile corrosion inhibitors or
desiccated packs. Items requiring protection from physical damage to surfaces,
or which are fragile by nature, shall be protected by wrapping, pack compart-
mentization or carbonizing of the individual item. The cooling system shall be
filled with a fresh solution of 50 percent water and 50 percent antifreeze con-
forming to MIL-A-46153, and a tag attached indicating the temperature to which
the cooling system can be subjected before freezing. The crankcase shall
contain the required amount of lubricating oil. A guide shall be furnished
indicating in detail the preservation materials to be removed, in detail, and
any other servicing required prior to placing the scraper in operation.
Packing shall be level A, B, or commercial as specified (see
5.2 Packing.
6.2).
5.2.1 Level A. Each complete scraper, preserved as specified in 5.1, shall
be packed in accordance with level A packing requirements of MIL-T-3351, as
specified for type II unboxed (mobile) scraper.
5.2.2 Level B. Each complete scraper, preserved as specified in 5.1, shall
be packed in accordance with level B packing requirements of MIL-T-3351, as
specified for type II unboxed (mobile) scraper.
5.2.3 Commercial. Each complete scraper preserved as specified in 5.1, shall
be packed in accordance with MIL-STD-1188. Commercial packing must protect
items against physical and environmental damage during shipment, handling and
storage.
5.3 Marking.
Marking for level A or B protection shall be in accordance
5.3.1 Military.
with MIL-STD-129.
Marking for commercial packaging shall be in accordance
5.3.2 Commecial.
with MIL-STD-1188.
6.
NOTES
6.1 Intended use. The scraper covered by this specification is intended for
use in general earthmoving work such as construction of military roads and
airfields, and for airborne and airmobile operations.
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals