 |
|||
|
Page Title:
Table II. Classification Of Defects |
|
||
| ||||||||||
|
|  MIL-S-60828A(MU)
4 .3.2
Examination and tests.
4.3.2.1
Components and subassemblies.- All components and sub-
assemblies shall be inspected in accordance with the inspection provisions
contained in Supplementary Quality Assurance Provisions (SQAP) listed in
the technical data package (TDP). In the absence of SQAPS, the applicable
Quality Assurance Provisions of MIL-F-13926 and MIL-O-13830 shall apply.
4.3.2.2
Final acceptance inspection.- Subsequent to first article
approval, examination and tests related to Section 3 herein shall be per-
formed on a single defect (individual characteristic) basis in accordance
with MIL-STD-105 and the sampling plans specified in Tables II and III
herein. Examination and tests for Packaging, Packing and Marking shall be
in accordance with MIL-P-14232 and Section 5 herein. The tabulated classifi-
cation of defects in Tables 11 and 111 shall constitute the minimum inspec-
tion to be performed by the supplier after first article approval, compliance
with certification requirements as specified in 4.4.3, and prior to Govern-
ment acceptance or rejection by item or lot.
TABLE II - CLASSIFICATION OF DEFECTS
CHARACTERISTIC
REQUIREMENT
TEST PROCEDURE
CLASS
CRITICAL: NONE
MAJOR : AQL 1.0% Defective
4.6.4.1, 4.6.4.1.2
3.7.1, 3.7.1.2
Vibration (General and Vibration B
3.7.2.1,
4.6.4.5.1,
Optical-mechanical alignment;
qazimuth and elevation
3.7.2.2
4.6.4.5.2
3.7.3
4.6.4.6
Optical-mechanical alignment
retention
104.
3.7.9
4.6.4.7
Elevation accuracy
105
4.6.4.8
3.7.10
Plumb travel
q
106.
3.7.11
4.6.4.9
Range control accuracy
107.
3.7.12
4.6.4.10
Height adjustment mechanism
108.
3.7.4
4.6.4.11
Extraneous light emission
109.
3.7.5
4.6.4.12
Projected reticle image definition
110.
4.6.4.13
3.7.6
Projected reticle pattern accuracy
111.
3.7.7
4.6.4.14
Parallax
112.
3.7.8
4.6.4.15
Image tilt
113.
4.6.4.16
3.7.13
Electrical controls
114.
3.7.14
4.6.4.17
Arm 10547473 operability
I
115.
3.7.15
4.6.4.18
Range knob torque
116.
3.7.16
4.6.4.19
Sealing
117.
3.7.17 "
4.6.4.20
Interior atmosphere
118.
3.3.l(b)
4.6.4.21
Cleanliness
MINOR:
NONE DEFINED
The tests in Table II shall be conducted in accordance with the test
NOTE :
condition requirements in the "Test Facilities" requirement of
MIL-F-13926,
7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals