Standard vehicle and accessories.

Page Title: Standard vehicle and accessories.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-S-62127A(AT)

3. REQUIREMENTS

3.1 Standard vehicle and accessories. Except as specified in 3.1.1 through 3.1.1.2, the

vehicle, components, assemblies, and accessories to be delivered under the contract shall be the

manufacturer's standard or optional items, which meet or exceed the requirements of this

specification. All vehicle items shall be as represented and rated in the vehicle and equipment

manufacturer's technical data except the general configuration shall be as shown in figure 1.

Technical data shall be limited to specifications and technical material, identical to that furnished

to the authorized company representatives for selection of vehicle models and components, and

shall be on file in the engineering offices of the procuring activity prior to delivery of the items.

The vehicle and furnished accessories shall comply with all Federal Motor Vehicle Safety

Standards in effect on the date of manufacture.

3.1.1 Special requirements. In addition to the standard vehicle and components specified

in 3.1, the vehicle shall be furnished with special equipment as specified herein.

3.1.1.1 Treatment, painting identification marking and data plates. As specified by the

procuring activity for the appropriate service (see 6.2), treatment, painting, identification

marking, and data plates shall be in accordance with MIL-STD-1223.

3.1.1.1.1 Type gas. The name of the gas, "HELIUM, " shall be painted on each side of

the semitrailer forward of the control cabinet assembly in block letters 4 inches high. The

lettering "FOR USE WITH HELIUM ONLY" shall be painted on the inside and outside of each

control cabinet assembly rear access door in block letters 2 inches high.

3.1.1.1.2 Control marking. All valves, gages, controls, and indicators used in operation

of the semitrailer shall be identified by securely attached nameplates of such composition that

exposure to oil, dirt, light and moisture will not fade or cause them to become eradicated.

3.1.1.2 Drain plugs. All drain plugs installed throughout the semitrailer for the purpose

of draining lubricants shall be of the magnetic type.

3.2 Vehicle weight and ratings.

3.2.1 Curb weight. The curb weight of the semitrailer shall include all attachments,

accessories, equipment and the 38 helium pressure vessels installed on the vehicle.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business