 |
|||
|
Page Title:
Preservation, packaging, packing and marking. |
|
||
| ||||||||||
|
|  MIL-S-63348A(AR)
fully automatic, 30 rounds in bursts and 10 rounds fully automatic.
A total of 30 groups or 3000 rounds shall be fired per weapon.
Immediately prior to the firing of each 100 round group, each weapon
shall be dry fired twice i.e. charging and firing the weapon without
ammunition. After every 600 rounds, clean and lubricate the
weapon. Failure to meet the requirements of paragraph 3.4.8 shall
constitute rejection of the First Article sample.
4.8.2 Comparison test. The submachineguns selected for
comparison testing shall undergo the tests as specified in paragraph
4.4.2. If the Comparison Test samples fail to pass the requirements
of 4.4.2, the Contractor shall take corrective action, as Specified
in the contract, on parts, sub-assemblies and finished
submachineguns, in process and final assembly, but not yet accepted
by the Government. The Contractor shall also take corrective action
to prevent recurrence of similar defects in future production.
5.
PREPARATION
FOR
DELIVERY
5.1 Pilot pack. A pilot pack shall consist of a complete and
packed intermediate package in accordance with Packaging Data Sheet
9327045 for the level of protection specified in the contract (see
6.1) and forwarded in accordance with 3.1.
5.2 Preservation, packaging, packing and marking. Weapons with
equipment shall be unit packaged, packed and marked in accordance
with the requirements of Packaging Data Sheet 9327045 for the level
of protection specified (see 6.1).
5.3 Repair parts. Repair parts shall be unit packaged, packed,
and marked in accordance with the requirements of the applicable
Packaging Data Sheets specified in the contract (see 6.1).
6.
NOTES
Procurement documents should specify the
6.1 Ordering data.
following:
a.
Title, number and date of this specification.
b.
Lists of drawings and specifications pertinent to the
weapon showing applicable revision dates.
c.
Examination and testing criteria for components (see
4.5.2.1, 4.5.2.3, 4.5.2.4, 4.5.3.2, 4.5.3.3.2).
That packages opened for examination shall be repackaged
d.
by the contractor at the contractor's expense (see
4.5.2.4).
e.
Disposition of interchangeability and endurance tested
weapons (see 4.7.7 and 4.7.8).
46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals