 |
|||
|
Page Title:
Table II. Quality Conformance Test and Exam inations and AQL |
|
||
| ||||||||||
|
|  MWS-82529(OS)
4.5,1.6.2 Minor. Subject the switch to two shocks of 1200 plus or minus
120g peak magnitude. The shocks shall have a pulse shape approximating a one-
half sine wave having a duration of 1 plus or minus 0.25 millisecond. Apply the
shocks in two directions 90 degrees apart and perpendicular to the major shock
axis. Thereafter the switch shall pass the quality conformance inspection tests
except for the functioning tests of 4.6.2.3.
4,5. 1.7 Current capacity. Connect a voltmeter across the following leads.
Apply direct current as specified for not less than 90 seconds. The voltage drop
shall not exceed the specified value.
circuit
Voltage Drop
Current
Brown to Orange
15 plus o
1.5 volts
minus 2 amperes
1.5 volts
Blue to Green
15 plus o
minus 2 amperes
White to White
0.1 volt
1 plus 0.0
minus O. 1 ampere
4, G Quality conformance inspection. Samples selected using the plans
and procedures set forth in Table II of this specification shall be subjected to the
tests and exam inations as described in 4.6.2.
Table II. Quality Conformance Test and Exam inations and AQL
Sampling
Test
Test
AQL
Plan
Paragraph
Circuit resistance
l
White lead to White lead
2.5
4.6.2.2
*
Brown lead to Orange lead
1,0
*
1.0
Blue lead to Green lead
l
l.O
4.6.2.1
Insulation resistance
l*
**
4.6.2.3.1
Temperature, nonfunction
l MIL-STD- 105D Inspection Level II
l *MIL-STD- 105D Special Inspection Level S-3; zero defects accepted
15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals