Classification of inspection

Page Title: Classification of inspection
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-S-83427(USAF)

4. QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the contract

or purchase order, the supplier is responsible for the performance of all inspec-

tion requirements as specified herein. Except as otherwise specified in the

contract or order, the supplier may use his own or any other facilities suitable

for the performance of the inspection requirements specified herein, unless

disapproved by the Government, The Government reserves the right to perform any

of the inspections set forth in the specification where such inspections are

deemed necessary to assure supplies and services conform to prescribed

requirements.

4.2 Classification of inspection. The inspection requirements specified herein

are classified as follows:

(a) First article tests

(b) Quality conformance tests.

4.3 Test conditions

4.3.1 Atmospheric conditions. Unless otherwise specified, all tests required

by this specification shall be made at an atmospheric pressure of 28 to 32 inches

of mercury, at a temperature of 77 (plus or minus 18) degrees Fahrenheit, and at

a relative humidity of 80 percent or less. Where tests are made with atmospheric

pressure or temperature substantially different from these values, proper allow

ante shall be made for the change in instrument reading.

4.3.2 Test attitude. Unless otherwise specified, the survival kit container

shall be tested in the normal operating attitude.

4.4 First article tests. The first article tests shall consist of all of the

tests described under 4.6 and shall be conducted in accordance with the approved

first article test program (see 6.2).

4.4.1 Sequence of tests. Before any other first article tests are performed,

the three automatic actuators shall be tested to demonstrate compliance with

MIL-C-25918. The first article tests specified in 4.4 shall be conducted in the

following sequence:

(a) Examination of product

(b) Environmental tests

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business