 |
|||
|
|
|||
| ||||||||||
|
|  MIL-S-85419 (AS)
STARTER/APU, AIRCRAFT ENGINE, GAS TURBINE,
MODEL
Specification: MIL-S-85419
**LESS ISSUE
Manufacturer's part number
Manufactuer's serial number
Government order or contract number
National stock number
** For use by the Naval Air Rework Facilities
NOTES :
3.10.2 Marking of Product. The military part number shall not
be used on a starter/APU until notification has been received in
writing from the approving activity that the starter/APU has been
accepted for use on Navy aircraft.
3.10.3 Marking of Parts. Each part and assembly shall be marked
with its part number and drawing revision symbol where
applicable, which shall be the same as the drawing number, except
the following:
3. 10.3.1 Those parts which do not have a suitable or sufficient
surface for a part number,
3.10.3.2 Those parts which are permanently assembled by welding,
brazing, soldering, or riveting shall carry the assembly part
number.
.
3.10.4 Part Number. The part number shall, when practicable, be
located to permit its being read after assembly of the complete
unit. The marking shall be such that it will not be affected as
a result of service usage during the life of the part.
3.11
Part Number and Parts List
3.11.1 Part Numbers. Starter part numbers are not to be coded
to describe Part characteristics and shall be limited to a
maximum of 10 digits or characters. All parts shall be marked
with the latest drawing revision letter or number to which the
part was made.
3.11.2 Parts List. A parts list is a tabulation of the items
necessary to fabricate or assemble the starter to which the list
applies. The parts list for the starter which is granted first
article approval based on (1) the satisfactory completion of the
first article tests and (2) the approval of the first article
test detail inspection and test report by the approving activity
shall constitute the approved parts list for any subsequent
starter of the same model to be delivered to the Government. All
parts shall be marked directly with an identification number and
the vendor or fabrication source of that particular part, unless
23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals