 |
|||
|
|
|||
| ||||||||||
|
| MIL-S-8551O(AS)
3.12.3 Paint. The paint finish shall consist of one coat of zinc-chromate
primer conforming to TT-P-1757; followed by two coats of enamel conforming to TT-E-
489.
3.12.4 Color. The seat and restraint system color shall be specified by the
acquiring activity and shall be in accordance with the cabin color scheme specified
for the aircraft in which the seat will be used.
3.13 Identification of product.
3.13.1 Seat identification. A nameplate, permanently and legibly filled in
with the following information, shall be securely attached to a permanent portion
of the seat in a position capable of being read after the seat is installed.
Marking shall be in accordance with MIL-STD-130 in 1/8 inch letters and numerals.
Seat, Helicopter Cabin
Type (I or II, as applicable)
Class (A, B or C, as applicable)
Size (1, 2, 3 or 4, as applicable)
MIL-S-85510(AS)
National stock no.
Manufacturer and code
Contract or order no.
Serial number
US property
3.13.2 Restraint identification. Each individually replaceable strap shall
have a permanent label attached. Each label shall contain the following information:
National stock number
Manufacturer and code
Part number
Date of manufacture
Retirement date
Serial number
3.13.3 Energy absordber identification. Each individually replaceable and/or
exchangeable energy absorber (load limiter) mechanism shall have a pemanent label
attached. Each label shall be marked in accordance with MIL-STD-130 and shall
contain the following information:
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals