|
| ( Insert list of manufacturer's applicable drawing s.)
DRAWINGS
(Insert paragraph describing procedure required to obtain copies of
documents listed in this section.)
REQUIREMENTS
3.
3 .1 Detailed design requirements. - The detailed design requirements
shall be in accordance with 3.4.2 of MIL-S-8710
3.2 Special requirements. - Any special requirements which are deemed
necessary for this particular application.
3*3 Performance. - The strainer shall perform satisfactorily when
subjected to all of the specified tests of MIL-S-8710 and any additional
tests required by the model specification.
No bubbles shall form on the surface of the filter element when
inches of water and tested in
subjected to a pressure of
accordance with 4.6.2.
QUALITY ASSURANCE PROVISIONS
4.
(This section shall follow the form of section 4 of MIL-S-8710.)
4.6 Test methods. - The detailed procedure for any special tests
required by this model specification ion shall be described herein.
NOTES
b.
6.1 Intended use. - (Indicate specific use for which this strainer
is intended.)
.18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |