Click here to make tpub.com your Home Page

Page Title: Oxygen tank support
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-12407X(AT)
*
3.6.7 Oxygen tank support. When specified (see 6.2), the vehicle shall be equipped with
straps or other holding devices to hold three "E" size oxygen tanks (see 6.4). When specified
(see 6.2), holding devices for one "M" size oxygen tank shall be furnished in lieu of the holding
devices for the three "E" size tanks. The holding devices shall secure the tanks in a location
where gages and connections are accessible to the attendant, but where the tanks do not interfere
with the driver's vision to the rear and with the driver's and assistant driver's view of the patient
compartment. The oxygen tank retention system shall conform to AMD standard 003.
3.6.8 Ventilation. Ventilation shall be provided for the driver and patient compartments.
Ventilators shall be provided in the driver's compartment and on the top or sides of patient
compartment roof. The patient compartment ventilator(s) shall be of the power intake type
having a total capacity of not less than 400 cubic feet per minute. A rheostat control or a
two-speed switch shall be mounted on the instrument panel. Vent opening(s) shall be provided
with an attached weatherproof cover with a means for opening and closing from inside the
vehicle. Power ventilator openings inside the vehicle shall be furnished with a safety grille or
screen.
3.6.9 Tinted windows. Tinted, heat absorbing window safety glass shall be furnished for
the windshield. Tinting of lamination material is not acceptable.
3.6.10 Air conditioning. Unless otherwise specified (see 6.2), automotive air
conditioner(s) with required allied components shall be furnished to air condition both the driver
and patient compartments. The air conditioner(s) shall have a rated cooling capacity at engine
idle speed of not less than 20,000 Btu per hour at 95F dry bulb ambient outside temperature and
67F wet bulb inside vehicle temperature. The air conditioning unit(s) shall be an integral part of
the vehicle. Air conditioner(s) shall not be mounted on the roof.
3.6.11 Domelights. At least four domelights shall be installed, one in the driver's
compartment and three in the patient compartment along the center of the aisle. The patient
compartment domelights shall be provided with a translucent lens. Each light shall provide not
less than 40 foot-candles of illumination at lower stretcher patient level.
3.7 Electrical accessories.
3.7.1 Spotlight(s) and rear floodlight. Unless two spotlights are specified (see 3.7.1.1) a
single spotlight, mounted on the vehicle centerline, directly over the windshield header section
with inside controls easily accessible to the driver and assistant, shall be furnished. The spotlight
shall be of the roof mounted type and shall be a Unity Model U275 or equal. In addition, rear
mounted floodlight shall be furnished with door switches which automatically turn the floodlight
22

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business