 |
|||
|
Page Title:
Figure 1.First article or periodic production tests |
|
||
| ||||||||||
|
|  1. When the purchase document specifies Level C packaging and packing. this test is not required; other - preceding
the vibration, transportation, handling and storage tests are required only for the first article sample.
2 Prior to performing the vibration. transportation. handling and storage test, insulation resistances shall be measured
wthout removing the panel-chassis assembly from the case. Contacts to GND listed by tables V and VI shall be made
to pin B of the TEST STAND connector. The following insulation resistances cannot be measured at this time:
Wiper REL-X4 to Ground
a.
Wiper REL-XS to Ground
b.
c.
Moving Contact REL-IC to Ground
d.
Moving Contact REL-ID to Ground
3 All insulation resistance shall be measured after vibration, transportation, handling and storage.
FIGURE 1. First article or periodic production testS-
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals