 |
|||
|
Page Title:
Table I. Classification of visual and dimensional requirements |
|
||
| ||||||||||
|
|  MIL-T-21369C(OS)
109
A synthetic rubber strip shall be cemented to the angle (Ref 491049).
110
MIN (Ref 4862%)
3.000
111
1.000
MIN (Ref 4%2%)
Component identification shall be correct, legible and properly positioned
*112
(Ref 893786, 893787, 1261853, 1362835, 1402300).
*113
All parts and components shall be free of resin flash, spattered or excess
solder, metal chips and other foreign material (Ref 3.6).
l 114
Burrs and sharp edges shall be removed from all parts and components (Ref
3.6).
*115
Electrical connections shall be mechanically secure before soldering.
**116
Welding shall be complete, free of sharp edges and protrusions and indicative
of good workmanship (Ref 491047, 491049, 491050, 893792, 1125184).
MINOR
Markings on top and front of instrument case shall be centrally located
201
(Ref 1379022).
202
Identification marking of Cable Assemblies CA-731 and CA-802 shall be
legible and correct (Ref 490792, 497136).
203
Rubber tape shall be wrapped around CA-802 Cable Subassembly 893800
to obtain effective clamping (Ref 490792, 893800).
204
25.125
0.020 (Ref 491047)
205
10.062
0.020 (Ref 491047)
206
2.500
0.020 (Ref 491047)
207
14.187
0.030 (Ref 491049)
1.468
0.010 (Ref 491049)
209
25.125
0.030 (Ref. 491050)
210
10.062
0.030 (Ref 491050)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals