 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-21578A
(b) Selection of applicable levels of preservation, pack-
aging, and packing required.
(c) Items of data required (see 6. 3).
6.2.1
Contracts or orders should specify the following provisions
for preproduction inspection.
6. 2.1.1
Whether preproduction inspection is required. When a
contractor is in continuous production of the items from contract to contract,
consideration should be given to waive the preproduction inspections. If prepro-
duction inspection is required, indicate:
(a) where the preproduction inspection is to be conducted
(at the contractor's plant or Government or commer-
cial laboratory).
(b) that the approval of preproduction samples or the
waiving of the preproduction inspection shall not re-
lieve the contractor of his obligation to fulfill all other
requirements of the specification and contract.
6.3
Data - For the information of Contractors and Contracting
Officers , any of the data specified in (a) subparagraphs below, (b) applicable
documents listed in Section 2 of this specification, or (c) referenced lower-tier
documents need not be prepared for the Government and shall not be furnished to
the Government unless specified in the contract or order, The data to be furnish-
ed shall be listed on DD Form 1423 (Contractor Data Requirements List), which
shall be attached to and made a part of the contract or order.
Preproduction data - When preproduction samples are sub-
6. 3.1
mitted (see 6. 2) they should be accompanied by one complete set of manufacturer's
drawings, the contractor's model specification, a parts list, and a complete test
report showing the results of the contractor's tests. The test report should include
the following:
(a) Report of all tests, graphically presented when possible,
together with a detailed statement indicating compliance
or extent of noncompliance with all requirements of this
specification, referring specifically to paragraph num-
bers. Wherever a requirement is considered to be not
applicable, the report should so state.
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals