 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-21578A
(1) Control valve airpressure test (see 3.4.5.2.2)
(m) Shut-off valve operating torque test (3.4.5.2.3)
(n) Variable speed regulation and response (3.4.8.1 and
3.4.8.2)
Installation data - Installation data shall be provided not
6. 3.4
less than 30 days prior to the preproduction tests. This data shall consist of test
stand characteristics such as weight, volumetric dimensions, special foundation
requirements, utility and services requirements (including ventilation, air,
steam, water, electricity, drains, etc. ). One copy of commercial installation
data shall be packed with each test equipment. Three additional copies shall be
shipped in accordance with instructions to be furnished to the vendor.
Schematics - Electrical, pneumatic, lubrication, hydraulic,
6. 3.5
and fuel systems schematics of the test equipment shall be permanent y affixed to
the equipment in a readily available position for reference by the operator, These
schematics shall be clear and easily interpreted by using standard codes. Schema-
tics shall be a minimum of 8 inches by 10 inches. Test equipment built in sections
shall have sectional schematics in addition to the composite schematic.
6. 3.6
Handbooks - A handbook in accordance with MIL-H-7960
(Handbook, Operation and Service Instructions (Test Equipment and Support Equip-
ment) ) shall be provided. A tabulation of the test equipment characteristics such
as weight, floor space, utilities and facilities requirements shall be included as
well as photographs illustrating salient features of the test stand. Three copies
of the handbook shall be supplied and shipped with each test equipment. Three
copies of the handbook shall also be furnished,
6.3.7
Commercial literature - Three complete sets of commer-
cial literature or handbooks covering all the commercial components of the basic
test equipment, normally furnished by the manufacturer of commercial vendor
items shall be packed with each test equipment in loose leaf form. The handbooks
or commercial literature shall contain the manufacturer's operating and service
instructions. Three complete sets shall also be furnished.
Data sheets - A data sheet covering the test equipment shall
6.3.8
be prepared in the form of a reproducible copy in accordance with MIL-D-19731
(Data Sheets for Aircraft and Missile Systems Support Equipment). The data sheet
shall be approved. The final draft shall be provided, The data sheet shall include
the complete Standard Commodity Classification (SCC) number for the test equip-
32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals