 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-2452J
manufacturer's technical data. Technical data shall be limited to specifications and technical
material identical to that furnished to the authorized company representatives for selection of
vehicle models and components and shall be available to the engineering offices of the procuring
activity, prior to delivery of the items. The chassis model furnished shall be not older than the
chassis manufacturer's current model on the date of the invitation for bids.
3.1.1 Special requirements. In addition to the standard vehicle and components specified
in 3.1, the vehicle shall be furnished with special equipment as specified herein.
3.1.1.1 Painting and marking. Treatment, painting, identification marking and data
plates shall be in accordance with MIL-STD-1223, as specified by the procuring activity for the
appropriate service (see 6.2), except for the following:
(a)
The exterior of the complete body unit (see 3.5 through 3.5.8) shall be treated and
painted in accordance with type A of MIL-T-704;
(b)
The interior of the body shall be painted with rust inhibiting primer and
manufacturer's standard color;
(c)
The color of the exterior of the vehicle shall match color chip No. 13538, gloss
yellow, of FED-STD-595 for the Navy; color chip No. 16081, gloss gray, for the
Air Force; and color chip No. 17875, gloss white, for all other services;
(d)
The color of vehicle identification marking shall be gloss black, color chip
No. 17038, for the Navy; reflective white numerals and letters on a red background
for the Air Force; and gloss black numerals and letters, color chip No. 17038, on a
reflective white background on the vehicle and on front and rear marking plates for
all other services;
(e)
Rubber seals and hydraulic hoses shall not be painted.
*
3.1.1.2 Rustproofing. When specified (see 6.2), the cab, chassis and complete underside
of the refuse collection body, including fenders, skirts and wheelwells shall be rustproofed in
accordance with FED-STD-297. When specified (see 6.2), tropical rustproofing in accordance
with FED-STD-297 shall be furnished.
3.1.1.3 Drain plugs. Drain plugs installed in the rear axle(s) shall be of the permanent
magnet type.
3.1.1.4 Towing devices. Not less than two hooks, loops, pins, or a single, center
mounted towing eye for towing purposes shall be furnished on the front of the vehicle.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals