Click here to make tpub.com your Home Page

Page Title: Cleaning, painting, plating, anodic films, and chemical treatments
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-T-26025E (USAF)
c.
American Coleman, WA-1211RROOORR, Wire.
Berg, 702, Receptacle (wired in accordance with SAE 506 B).
d.
American Coleman, 541-88, Harness.
e.
dd itional pintles for aircraft towing. When specified (see 6.2, the tractor shall have an
3.7.3.
additional front and back pintle which complies with DL68E34230, except all electrical/receptacle
requirements are deleted,
Pintle arrangment for testing.  When specified (see 6.2), the tractor shall have an additional
3.7.4
front pintle which complies with DL68E34230, except all electrical/receptacle requirements are deleted.
3 . 7 . 5 Fire Ext inguishers.
Two 17lb Halon 1211 Fire Extinguishers (3-A: 80B: C) in accordance
with A-A-1108, Type E, shall be provided with holding brackets. They shall be mounted at the right and
left side rear surface of the tractor.
Finish and protective coatings.
i
3.8
Cleaning, painting, plating, anodic films, and chemical treatments.  Cleaning, painting,
3.8.1
plating, anodic films, and chemical treatments shall be in accordance with MIL-STD-808 and/or MIL-T-
704, except that commercial (see 6.3.1) components maybe prepared in accordance with the
manufacturer's standard practice, provided it is compatible with the exterior finish paint.
Finish. The exterior paint finish shall show no evidence of uneven application, curtains,
3.8.2
runs, sags, orange peel, lack of adhesion, or other defect and shall be capable of passing the test described
in paragraph 4.8.10 of MIL-C-83286.
3.8.2.1 Forest Green. Unless otherwise specified (see 6.2), the outer surface of the vehicle and the
interior surfaces of compartments (except in the cab) shall be painted with polyurethane paint, Forest
Green, Color Number 24052 of FED-STD-595. The paint shall be in accordance with MIL-C-83286, or shall
be a commercial polyurethane paint which meets the following requirements of MIL-C-83286:
Low temperature resisitance.
(1) Paragraph 3.7.3.4
Accelerated weathering.
(2) Paragraph 3.7.3.6.1
(3) Paragraph 3.7.3.7
In addition, the paint shall have a minimum pencil hardness of 6H when tested in accordance with
paragraph 4.8.12 of MIL-C-83286. All exterior trim items (such as wheels, wheel covers, running boards,
metal radiator grilles, drip rails, bumpers, door handles, and light trim rings) shall be painted with the
same paint as the exterior of the vehicle.
3.8.2.2 Desert Sand. When specified (see 6.2), the outer surface of the vehicle and the interior surfaces
of compartments (except in the cab) shall be painted with polyurethane paint in accordance with MIL-C-
46168 or MIL-C-53039, Desert Sand, Color Number 30313 of FED-STD-595. All exterior trim items (such as
wheels, wheel covers, running boards, metal radiator grilles, drip rails, bumpers, door handles, and light
trim rings) shall be painted with the same paint as the exterior of the vehicle.
roofing  The vehicle shall be rustproofed in accordance with the contractors' standard
3.8.3
commercial practice provided that the requirements in 4.5.17 are met. The first article units shall not be
rustproofed until after approval of the first article test report.
19

Privacy Statement - Press Release - Copyright Information. - Contact Us