(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
6.1 Intended use. The fire truck specified in this specification is
intended to be used to suppress fires.
6.2 Acquisition requirements.
Acquisition documents should specify the
Title, number and date of this specification.
Issue of DODISS to be cited in the solicitation, and if required, the
specific issue of individual documents referenced (see 2.1.1 and
When first article is required for inspection and approval (see 3.2,
4.2.1, and 6.4).
When engine coolant heater is required (126.96.36.199).
When a spare wheel or rim is required (see 188.8.131.52).
When MIL-V-62038 presentation is required, and the level of
presentation and packing required (see 5.1).
6.3 Data requir ements. When this specification is used in an acquisition
and data are required to be delivered, the data requirements shall be developed
as specified by an approved Data Item Description (DD Form 1664) and delivered
in accordance with the approved Contract Data Requirements List (CDRL),
incorporated into the contract. When the provisions of DOD FAR Supplement, Part
27, Sub-Part 27.475-1 (DD Form 1423) are invoked and the DD Form 1423 is not
used, the data should be delivered by the contractor in accordance with the
contract or purchase order requirements.
6.4 Fir s t Articl e. When a first article inspection is required, the item
will be tested and should be a first production item or it may be a standard
production item from the contractor's current inventory as specified in 4.2.1.
The first article should consist of one unit. The contracting officer should
include specific instructions in acquisition documents regarding arrangements
for examination, test and approval of the first article.
6.5 Subject Term (key word) Listing.
Fire extinguishing truck
Navy - YD
Navy - YD
Navy - MC