 |
|||
|
|
|||
| ||||||||||
|
|  MIL-T-43694(GL)
Inspection level
AQL
For examination in 4.4.2.1
III
Major 0.25
Total 6.5
For examination in 4.4.2.2
S-3
6.5 One Class
For examination in 4.5
S-2
6.5 One Class
For examination in 4.6
S-2
6.5 One Class
4.3 Examination of preparation for delivery requirements.- An examination
shall be made to determine that the packaging, packing and marking complies
with section 5 requirements. The sample unit for this examination shall be one
shipping container fully prepared for delivery, except that it need not be
sealed. Examination for closure defects shall be made of shipping containers
fully prepared for delivery. Characteristics to be examined and the defects
applicable thereto shall be as specified below.
Examine
Defect
Marking (interior
Omitted; incorrect; illegible; improper size, loca-
package and exterior
tion, sequence, improper method of application
container)
i.e., not on shipping tag or paper label (when
applicable).
Materials
Component missing, damaged, defective, or not as
specified.
Workmanship
Improper packaging, or closure of interior contain-
ers. i.e., improper closure of container flaps, or
improper taping of seams, comers, and manufactur-
er's joint (as applicable); loose strapping or
tape banding; inadequate stapling; bulging or dis-
tortion of containers.
Number per interior package or exterior container
Contents (interior
package and exterior
not as specified.
container)
4.6 Examination for palletization. - An examination shall be made to deter-
mine that the palletization complies with section 5 requirements. Defects
shall be scored in accordance with the list below, The sample unit shall
be one palletized unit load fully prepared for delivery. The lot size shall
be the number of palletized unit loads in the end item inspection lot.
6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals